The introduction of push back rack
- in rack pressure also known as push back rack, is one of the high density storage shelves system, suitable for a small batch of goods storage. Pressure - in rack is designed to increase storage efficiency of the storage shelves form. Its principle is between the front and rear beam with multiple layers trolley or rail) overlap connected, and cross on the double track. The rail is fixed on the shelf beam at a certain angle, and the trolley is running along the track. When purchasing, the tray is stacked on the trolley (or guide rail), the rear storage tray will be pushed into the original tray. The ship, when the outside the tray to pick up points taken away, the inside of the trolley will automatically slide to pick up points. Effective use of a single channel access, especially suitable for storage management of cargo transfer area.
Pressure type shelf with advanced after storage concept, the overall structure of "clip" principle, the tray is placed on the carrier in order to be pushed into the inner shelf, access mode and rack through the same, but forklift does not need into the interior of the shelf, only need to work in the front of the shelves forklift channels. The maximum depth of the pressure in the shelf is in the 5 tray bit (4 layers of trolley stacking with). Pressure on the shelves of the drive into the shelf and gravity type of the advantages of the shelf, can achieve a single end access, advanced, suitable for a small variety of bulk cargo storage, the small size of the warehouse is particularly applicable. Warehouse usage can be as high as 70%. Compared with heavy shelves (pallet shelves) can save 1/3 space, increase the storage density, such shelves with high storage density, storage and transportation of typical characteristics, but can not do the first out of the management of goods.
The pressing type shelf is mainly composed of a column, a beam, a rail and a carrying trolley. The rail is fixed on the shelf beam at a certain angle, and the vehicle is running along the track. By the front will be pushed into the tray goods, tray items placed on the slide, and later will be filled with the original pushed to the rear. Cross slide on the sliding rail, rail itself has a tilt angle, the sliding seat will automatically slide to the front entrance. The overall structure of "clip" principle, the tray is placed on the carrier in order to be pushed into the inner shelf, access mode and rack through the same, but forklift does not need to enter the interior of the shelves, the shelves in the depth direction can be designed for multiple pallet position and push back rack space using rate is higher than the ordinary shelf. Safety and operational efficiency are much higher than the through type shelf, widely used in cold storage, books, electronics and other industries.
Press in rack from the pallet rack evolved, also called push back rack or push type shelf. Adopting the principle of track and pallet car, the track is a certain slope (about 3 degrees), using the weight of the goods, the pallet goods are provided in the single end storage, the goods are advanced, suitable for large quantities of less variety of goods storage, space utilization rate is high, access is also more flexible and convenient. Shelf total depth should not be too deep, generally within the depth of 6 pallets, or due to the pallet car with each other due to the embedded space will make greater sacrifice. The weight of a single tray is generally less than 1500kg, the height of the shelf is generally below 6m.
